Hi Mikhail,
hm, that sounds odd. From what i can tell you did everything correctly. I tested this with the latest version and got it working that way.
Please check if the current language is set to "ru", you can do that via the articy tab and check "
Current Language". Especially make sure that no spaces are used.
If the current language is set go into your Asset/ folder and check if in
ArticyContent/Generated/Resources there should be an asset called "general_ru".
If it exists click on it and enable
debug mode in the inspector to see its content. Make sure your entry is in "
M Loca Keys" and "
M Loca Values".
If nothing helped there must be a different problem, if that is the case please send us a quick email to
support@nevigo.com with the excel file, if possible the articyu3d file or the unity project and i will see whats going on.
Sorry for the inconvenience
Best regards
Nico